solver

Right now, 1 USD = 1.3 AUD -- I see the problem. And yes, what I show above was done in Chief. The problem is that Pro imports all symbols drawn in other than Chief as a fixture. You cannot model this in SketchUp, for example and import as a cabinet door. Your only option is to have someone create the symbol in Chief, but that can get expensive too. Work hard, increase your prices so you can upgrade

Any pictures of the garage side?

Roof questions almost always require someone have the plan file to work with. Close Architectural before attaching. If this is an existing house, pictures of the roof will also be helpful.

Follow the instructions I pointed to above.

If this is an existing house, pictures of the roof. Attaching the plan file, close Suite first, will help someone help you. Roof problems in Suite rarely have a "just click this setting" solution.

There are lots of videos available on the Home Designer website and on the Chief Architect YouTube channel. Also articles that walk you through many common task.

How did you do that? You should change the Absolute values.

Reinstall, choose the Repair option. If that fails, uninstall and then install. If that fails, contact Chief Architect.

This is a cabinet door symbol so it works open at any angle. I did this one quickly so it's not perfect. I don't think you can do this in Pro. Are you still using Pro 2020?

Delete the walls on the upper floors.

You should generally turn on Auto Rebuild Foundation, and leave it on unless you need to make manual adjustments. In the plan you posted, rebuild the foundation and see what happens.

Depends on the question. You can start by correcting your signature. You have Home Designer X-2021, and there is no X-2021 product. We assume you are using Home Designer, so, for example, Pro 2021 (or Suite 2021 etc) is all that's needed. As for questions, All Words = No Good Pictures and a few well chosen words = Better Pictures, a few well chosen words, and the plan file = Best And please post images directly -- no need to make a PDF of an image. This makes it easier for others as an image shows in the forum. Thanks for asking.

Unfortunately, there is no control over where the ridge builds. You will need to delete it and draw in your own, or move it down and manually extend the rafters. Group select and extend. You can set the ridge to 1/16 x 1/16, but cannot simply turn it off, of make it 0 x 0.

The wall is only a tool used to force the roof to build as you want. Once the roof is correct, you turn off auto rebuild roofs, and delete the wall. Changing ceiling heights is the same. Once the roof is correct, you are free to set ceilings to their actual height. You also have manual roof planes and for a simple project like this, would be easy after a bit of study and practice.

The answer to this is fundamental to understanding how the program works. Draw a 1 room structure. Make the right and left walls gable. Draw an interior wall down the middle connecting the gable walls. Turn on auto rebuild roofs. Split the screen so you have the plan and a perspective overview showing. What happens when you change the ceiling height in one of the rooms? What happens when you move the center wall? Open one of the non gable walls and change the pitch -- what happens?

It's easier for us if you post images directly instead of a PDF of an image. This makes it easier for others as an image shows in the forum. What's stopping you from doing what you want? How do you control that wall height? What if you wanted the front and back walls to be 4'. How would you do that? What if you were building a single story house with 10' walls, how would you do that?

Troubleshooting is much easier with the plan file itself. Close Architectural, Zip it and attach and I'll have a look.

Your roof is easy to automatically build (shown below) if you learn, and think about how the program builds roofs. It's also easy to do using the manual roof tools. I've linked some learning resources above. The Help system has info too.

Search the Knowledge Base linked above for tray ceiling.

It helps us to have a clear question to answer. How do I ......... ? The simple answer is yes, you can do all of those things. The problem is your lack of control. You can only make all toilets dashed, for example. For a single toilet, you could use a CAD mask, dashed lines on a white filled background masking the standard HD symbol. Many items (like stairs) have a Fill that may be set and adjusted, including transparency.

There are various ways of doing, or at least getting close to what you want. Remember foundations are made up of walls which create rooms just like the structure above. Sometimes the auto foundation builder works, especially for simpler foundations, sometimes you will need to make manual changes. I set a room as Slab and built the foundation in Architectural. Walls on 1st floor set as invisible. Architectural has some limitations too.

You will need to show some pictures so we see what you have and you will need to describe what you want.

Grab this wall and move it forward a foot or 2. The program has no place to put your stairs -- all it sees is a hole in the floor. Open the angled wall or walls and get the angle. Add it to the Allowed Angles. Or click the off angle wall icon and select Ignore.

Search the Knowledge Base I linked above. Try searching for porch.

Pro has manual roof tools that may be used to create the skirt roof. Using invisible walls and setting the room they create to Open Below will also work.