DavidJPotter

Only Architectural and above have the "Pony-Wall" Feature you need to show a foundation wall that has concrete on the bottom and frame wall on top (Like Jp_Ann said). If you wish to step the foundation as well, you can skip Architectural and go with Home Designer Pro that also has the ability to pony-wall and STEP foundation walls. Happy Thanksgiving! DJP

In a camera view, select the unwanted wall, open its dialog box and then go to "Wall Types" and change just that one wall to the wall type that you do wish to be there. Then click "OK" to close the dialog box. DJP

I think your best bet is th use the material region or custom backsplash tool to create your "Angled slash) across the glass doors and glass wall created while in an elevation camera. DJP

There have been some discussion and a few videos about Chief Premier X13 (Version 23) upon which Home Designer Pro 2022 will be based. Beta Testing of X13 has not yet started (probably early next year), so no one knows, even at Chief Architect Inc what exactly will be in HD Pro 2022, You will just have to wait. DJP

No, not really just as jlliles87 indicated above. In Chief Premier one easily can do this and many, many other choices but it also costs a lot more than Home Designer software does. DJP

Foundations can be drawn manually or "automatically" (all "Automatic" procedures are dependant upon YOU properly pre-setting all attributes and settings before "auto" building anything, so it is only usefully "Automatic" IF your pre-settings are correct in Default Settings and within Room Specification Dialogs). It takes a while to learn where all the settings exist and when and how to use them, so do not get in a hurry but rather be very methodical and plodding until you gain through study and practice what is what and when is when. DJP

They can be found under "Help" in your running program, they also can be found at the Home Designer Website under "User Center" and also under "Support - Knowledge Base" where searchable help articles, training videos and other useful resources can be found and used. DJP

See if this is what you are looking for please DJP

DJP

Commonly garage rooms are lower than the main home due to the fact that the threshold of the garage door is usually at grade and by code home floors must be at least 6" above grade. Also most garage floors are slanted with the lowest end just under the garage door. Chief Premier and Home Designer software does not by settings create a slanted floor so I commonly set the garage floor at its lowest to accommodate that tradition (as you have in your image). So it is likely that the door into the main home would be elevated relative to the garage floor by default. The double-doors shown on the right of your image must lead to a room off the garage for HVAC or just storage, its floor should be set to the same height as the garage for easy access. In short, you were not "wrong" there but you should be overt about such settings as I explained above in the future. DJP

Spectrum 500 Mbps here in Austin. DJP

DJP

The assigned material has NOTHING to do with whether or not a plinth block is visible in plan view. In this software such visible objects in camera views are symbols that are designed to be visible in camera views but in Plan View what you are seeing is 2D CAD blocks that represent those symbols only in Plan View. All symbols in this software are thus programmed and constructed (2D CAD blocks for plan views and 3D symbols for camera views). Plinth Blocks are symbols that are manually added where you need them and they show in plan view and camera views ONLY if their layer is checked ON in plan and camera views. If their layer is off in plan view then they will NOT be visible and if checked on in camera views only then will they be visible in camera views. DJP

Using the Material Eye Dropper or Material painter tools is ONE way to accomplish a material assignment. The most usual way is by way of Default Settings - Roof - Materials Tab - Gutters. The fact is that there are numerous ways to set the Gutter Material within the software and it is a good idea to find out about them all and then evaluate for yourself which one is the quickest, best way for any instance of need. DJP

"Automatic" software cannot be preprogrammed to handle any and all possibilities, so when short-falls occur, the end-user must step in and correct what the software got wrong or incomplete. Walls have wall polylines that can be adjusted-edited in camera views (usually an elevation camera is best for such editing). Most software short-falls are caused by improper settings or paradoxical settings that cause unwanted results, so it is incumbent upon the end-user to spend some time learning all the settings and when and when not to use them and in what order to use or not use them. On my YouTube Chanel are many videos of me adjusting-editing wall polylines but the best method is by way of proper settings and procedures. DJP

Debbie, I opened your file and there were NO Plinth Blocks in the plan (Layer "Millwork") when I placed a plinth block, it showed clearly in plan view. DJP

This ability exists in Chief Architect Premier. DJP

DJP

You make it work DJP

This is a possible solution, take a look please, DJP

DJP

Teaching and using Home Designer and Chief Premier software since 1994. Your above statement is not truein the sense that unless the materials and their related texture (image) files are manually embedded into the plan file when sharing it with another user. The plan file contains the "LOCATIONS" of material texture files on YOUR COMPUTER ONLY. So if you share a plan file with another user without also sharing each associated material texture file with them (by using the "File - Back-Up Entire plan" command to share your plan file with others). Just saying for clarity. DJP

Without the plan to inspect the offending wall's dialog box, I would carefully inspect that wall's settings and if all else fails, you can manually frame that wall. The most likely culprit is settings usually. DJP

It appears to me that they ARE showing, what am I missing, please? DJP

HD Suite costs about $100.00 to own. The training available found under "Help" and at the Home Designer website is completely FREE. I do teaching and training (have for many years) but I charge $75.00 per hour for that help. Each video found at the Home Designer website is marked as to which product it applies to but you at least need to able to carefully look to see what help video is for what product. Home Designer Suite is well worth the money but is a lot less able in terms of features and tools compared to all other products Chief Architect offers for sale. You cannot obtain a product by guessing, so just increase your skill by study followed by practice. That IS what I did many years ago, I have never had a teacher, tutor other than myself and my determination to arrive. DJP