solver
-
Posts
9793 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by solver
-
Can I Remove an imported PDF after I drew the new plan over it?
solver replied to JoAnnWodke's topic in Q&A
Just make the changes to your plan. Tracing over an image is a quick way to get walls in place, but it's not accurate. You will need to move walls to match the dimensions shown on the plan. -
Right click in the Materials List.
-
Use the find in plan tool i showed above to locate that 2x10.
-
Is that what you wanted?
-
Your plan has no framing ... I built roof framing and don't see any problems. Try using this to find your problem 2x10
-
Search Help for dae.
-
Something odd about that block. I was able to explode it in Premier but not Pro. Please send in a report to support. Here is a plan with it exploded. Laundry Room.plan
-
Watch on YouTube: http://youtu.be/p05E_jyifn8?hd=1
-
Place the screen door on the same wall as the entry door. Select it and center it on the entry door.
-
Custom Backsplash
-
Google mac screen recording or similar. You probably already have QuickTime that will probably do it.
-
Forgot to say that the fencing needs to be applied as a Panel, not as balusters.
-
I drew a deck railing and applied them. Select them in the library and then click on one of the black balusters.
-
Click the L or U shaped stair tool.
-
And generally, houses are drawn with the front facing the bottom of the screen, unless the house is much deeper than it is wide. This plan is rotated. Splitlevelpractice (eric).plan
-
Watch on YouTube: http://youtu.be/pjbrSMKe16o?hd=1
-
If you are modeling an existing house, it would be helpful to have a few pictures of it.
-
No idea what your version looks like, or if it has these options.
-
Pro lacks a curved roof/ceiling plane tool. You can create one by using a dormer, explode the dormer and move the roof into position. Or, you can draw small planes varying the pitch on each to simulate a curve.
-
Open one of the outside roof planes and get its ridge height. Open the center roof plane, lock the pitch and enter the ridge height. It should raise up and you should see at least the front wall.
-
See the video -- start watching at 5 minutes in.
-
I can't tell from your image, but it looks like there is a roof below your shed roof. You need a hole in the lower roof, or simply move it out of the way.
-
Did you watch the video referenced above?
-
Since you have Pro, why not draw the shed roof manually? Here is a video that may help.
-
That feature is new in the 2021 version.
