solver
-
Posts
9793 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by solver
-
No. That's why the trick with the invisible walls and 1/64" spacing. You are creating a tiny room with no moldings.
-
Reference Grid?
-
Red line points to a Room Divider wall. Pull the glass wall back so it does not automatically connect. Draw the Room Divider, then snap the glass back. Draw 2 room dividers around the glass wall forming a room. Turn off the molding in this room. Move the walls 1/64" away from the glass.
-
Post plan file please.
-
Home Designer has only 1 page layouts.
-
You may need to contact Chief Architect Monday.
-
Please spend some time reviewing the Home Designer videos available on YouTube and/or the Home Designer web site. I think you will find that many of your how do I questions will be answered. It's common for people to see answers to their questions as being simple, and sometimes they are, but more often the answer is it depends. Posting good images and your plan file is usually helpful as they save lots of back and fourth and unnecessary effort.
-
Lights like to locate in a ceiling plane. Open it and change its location.
-
I believe Pro automatically makes a copy of the active layer set when sending to Layout, and saves it with the Layout. I'd send in to support if possible. Your .plan file(s) and layout files.
-
What function? Control drag is fairly universal for freely moving items.
-
Try selecting the faucet and holding the control key (or command key) drag it into position.
-
Roof Baseline Polylines http://youtu.be/7r36FJR4p7s?hd=1
-
You used walls shaped in elevation to create your beams? You can define a new wall type that is a single material. That may work better. You might consider sloped soffits for your beams too. A Custom Backsplash can be shaped into a beam as well.
-
Manual roof video. http://youtu.be/pkTshOC7Z5M?hd=1
-
Where does the south wall roof baseline go? Which wall is it over?
-
What I was suggesting is an outline of the roof you want. Something like this. Are you wanting something like this?
-
Don't understand what you want to do. You have not indicated North, South etc on the plan. Try marking up the plan showing the outline of the roof you want, or showing us a picture etc. Have you tried using a Roof Baseline Polyline? Not sure if it would help since I don't understand the problem.
-
Has someone else worked on the plan? You have a layer display problem. When you take a section/elevation, switch to the Camera View Set. You should see the missing items. This is usually the problem when something you expect to see is not shown -- the layer its on is not set to display in the current layer set.
-
Your .plan file -- not a picture of the plan.
-
Posting an image or 2 will help us see what you see. Posting your plan file will help us solve the problem.
-
What gap? Here is a short video going over the plan. http://youtu.be/9iJOiB0PHjk?hd=1
-
Slab for the curb. Another Slab, or a Custom Countertop for the cap. Posting an image of the existing shower will help.
-
Stairs normally display on the floor they are drawn on, so your stairs should display on the garage level and not above. Enclose the stairs with walls forming a room. You may need to make the room Open Below.
-
I don't understand what you are trying to determine. Here is a window done in Suite. Your rough opening will be larger than the window. The window frame size has nothing to do with the window or rough opening size. Are you concerned about room for wall framing?
-
And I'll agree with Keith -- manual roofs take a bit of practice, but they are one of the main reasons for having pro and very worth learning. Here is a video doing the roof and end of the porch. http://youtu.be/QaJe-bvT2dw?hd=1
