Rookie65

Members
  • Posts

    903
  • Joined

  • Last visited

Everything posted by Rookie65

  1. With Pro, the largest sheet it can save in a layout is 18"x24". What I do in that case if the plan is too big for 18x24 paper is send it to layout on 11x17 paper in 1/8" scale. Yet I will have my title block say "1/4"=1'-0" as the scale. You can put a border around the edges with the rectangular polyline tool to draw the line. When I send it to be printed, I have them double the print size and have it printed on 24x36 paper. DO NOT let them "fit to page" or it will mess up the scaling. This way you have a 22 x 34 correctly scaled drawing on 24x36 paper. This way there's no double printing to get what you want. Hope this helps?
  2. Rookie65

    Wall Heights

    Change it in room or floor defaults. You can set it to finished or rough height, depending on what information you have.
  3. for #2, you could try it with a custom countertop and raise it to the desired height. That will let you make different angled shapes and they can have a radius applied.
  4. It wasn't a total waste of time if something was learned from it. The only "template" I keep is a master plan saved with the defaults I like (font, door style, window sizes, siding, dimensions, etc.) so I don't have to reset them for every project. Then I save each new project with its own name and then change any particular defaults needed for that project only. That's why I feel bad when I see people post about saving a template of a particular house style, then realizing they want to change it after. We all have our own styles and depending on if you're using the program for business, or a weekend warrior, we all find what works best for us.
  5. With Pro, the largest sheet it can save in a layout is 18"x24". What I do in that case if the plan is too big for 18x24 paper is send it to layout on 11x17 paper in 1/8" scale. Yet I will have my title block say "1/4"=1'-0" as the scale. When I send it to be printed, I have them double the print size and have it printed on 24x36 paper. DO NOT let them "fit to page" or it will mess up the scaling. This way you have a 22 x 34 correctly scaled drawing on 24x36 paper. Hope this helps?
  6. Rookie65

    Pitch symbol

    I make my own, as I haven't seen one. I use text and just type the 12 on the first line, then hit enter and enter the pitch height on the next. Then draw a CAD line under the 12 and next to the height. Done in no time.
  7. Usually the foundation is what the walls of the basement are made from. It is still floor "0". Where the grade sits in relation to it is where you decide if there's room to make it a walkout or just a typical basement that usually has access to the outside through a bulkhead.
  8. Knowing what the circumstance is that it needs to be a walkout basement will help us help you. If it's because of terrain, maybe this will help https://www.homedesignersoftware.com/support/article/KB-00718/modeling-a-sloping-terrain-for-a-walk-out-basement.html
  9. Or if the basement floor needs to stay at the same level and it's a walkout due to grade conditions, then use pony walls to make that portion a framed knee wall over the foundation. The "upper half" will be whatever your main exterior wall is in (2x6 framing usually). The bottom will stay as concrete and you determine how high above the floor you want the foundation to end. And if it is because of grade, you'll need to change the stem wall for that area also to get it below the frost line out there.
  10. Change it to a lazy susan, then go to "front". uncheck default, then click on the door and at the bottom are the options to show it open. Then you can select the angle you want
  11. Without trying it myself, maybe using a lazy susan base cabinet re-positioned in size with no countertop? Delete the doors and then use 2 doors meeting as a "V" to make the image look like it? And could you not use the CAPS Lock on your posts? Thank you
  12. Rookie65

    Floor Height

    Well, you have a main floor at 0. What is the depth of the floor framing? Then, how far below is the garage floor? That is what your setting ought to be, plus about an inch so the garage floor is above the grade. Keep in mind the driveway should be above the grade to be visible. So when you add the driveway, make it 1/2" or so and set the depth to a couple of inches.
  13. Rookie65

    Floor Height

    Terrain can be tricky, yet think logically with it. Keep in mind it's initially based on the height BELOW the first floor. Keep in mind the garage floor level too when you set it.
  14. Rookie65

    Floor Height

    Ok, great. Yes, you are making good process. There's a learning curve to this, yet once you learn something, it stays with you.
  15. Rookie65

    Floor Height

    click on automatically build foundations and do not use the monolithic slab. Again, Suite and all of its limitations is not something I am familiar with. You may be able to get better help from someone who has used it.
  16. Rookie65

    Floor Height

    Go to your default settings under edit. Look at foundation and framing. See if "automatically rebuild" for foundations is checked. There you can also set your default for the garage stem wall which is something you'll want to look at as well. Of course, with Suite I do not know what all of the limitations are on what you can set.
  17. Rookie65

    Floor Height

    Do you have "rebuild walls/floors/ceilings" checked? Or rebuild foundation checked? What are your garage default settings?
  18. Not 100% sure on Architectural, though you should be able to go to the "default settings>doors>interior doors>options" and change the default from "determine by size" to "double doors only" if you are looking for a double door appearance.
  19. Ok. Never have seen them show up in any of the additional mfr catalogs that can be downloaded from the library. Actually, have not seen any of the major window companies be available for home designer. Good luck.
  20. They probably just exist for the actual Chief Architect program and not for the Home Designer series from Chief Architect. Though you can size the HD Pro windows to the sizes needed, change the label to the corresponding number if desired.
  21. If it's an upgrade, it should only be $99 with your existing product key. So far I like it. Haven't spent much time with the PBR, yet it seems like it's been an area of concern for many with trying to get the settings right, etc. There are some things that seemed to have been changed as to how to complete them now, though once you figure it out, it works fine. Still need to learn the new tricks and will do them as the particular need arises on a project. That's my 2 cents and I am sure others will expound on it greatly.
  22. Rookie65

    Raised Ranch

    Put in your grade so you have a reference point. It is done by setting a distance below floor 1. In your case, would probably be whatever the basement level is, then 4" lower possibly to allow for the step down often needed. Then since the garage is its own room, you can drop the level of that to grade. Or if you don't want to have the garage defaults take over, leave the room defined as a "basement" and change the display to show "garage". Then when you open that one room you can drop the floor lower to meet grade.
  23. Rookie65

    Raised Ranch

    Probably time to dig into the reference manual found in the "help" tab. When you open the room, concentrate on the floor you are working on. You can change each floor and those dimensions shown are cumulative. Think of it this way . . . the main house floor (level 1) should be at 0 inches. Then your basement floor (level 0) will be whatever height you need (say 8') PLUS the depth of the framing (say 10", which is 2x10 joists plus 3/4" subfloor. Though in Suite you may be stuck with one floor thickness/type only. So you use that. That will set the height of floor 0 below and it should be a negative number.