solver
-
Posts
9846 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by solver
-
Because you are not doing a shed roof
-
Open them and set the height. Switch to Absolute and set the head height to the same as your other windows. Unfortunately the software will not pick up horizontal centers.
-
No, and it's been suggested. It depends. If one is using the default floor heights and the other is not, resetting to the default will work, or just make the adjustments manually.
-
Check the bonus catalogs for something similar, or the 3D Warehouse (google it).
-
You should be able to take a measurement at any of the green lines. Turn off the hand rail display.
-
Can you say what measurement you need? Radius is a linear measurement, there is no angle involved. What angle do you need? I'd want the length of the red lines for each segment. Knowing the dimension of the tread you should have all you need to do the layout.
-
What is "radius angle"?
-
And for reference, these are shed roofs. If the top of a roof plane connects to another roof plane, it's not a shed.
-
You just have roof settings wrong in the walls from trying too many things. Go to Edit>Reset To Defaults Select All Floors and Roof Settings In Walls Click OK Set the walls in red to Full Gable.
-
Roofs build over rooms. To raise the roof, raise the ceiling height of the room below.
-
Use a Ramp. You set the floor to the height you want.
-
No Chief Architect does plumbing plans, but the others are possible.
-
The roof will build off the front wall of the porch. You have set the pitch and wall height, so you will need to adjust the depth of the porch (3rd leg of the triangle) to get the wall height you want. Move the front wall out to make the wall taller, in to make it shorter.
-
I only looked at the basement, but there you have the Ceiling Finish set to 4" with 2 layers, one is framing. Normally Ceiling Finish is drywall in 1/2" or 5/8" thickness. Here is another suggestion -- check Sun Follows Camera. As you rotate the model, the program will light the part you are looking at.
-
I was suggesting for the future. I set the floor structure to default for that room on the corner and it fixed the walls. I noticed you have what looks like extra framing that I've painted blue.
-
Vector View. Note how the edges are highlighted making them easy to see.
-
Try Edit>Edit Area>Edit Area (All Floors) Copy/Paste from one plan to the other.
-
Post the plan, and use vector view for images please.
-
Search the forum for rug.
-
Consider drawing CAD lines at the required angles. You could use the Make Parallel/Perpendicular tool to align the walls.
-
Open Help and search for Additional Angles. If you don't find it, then Architectural must not have it.
-
See Additional Angles.
-
Yes -- the ones that say User Library
-
Click the Show... button.
