LawB10
-
Posts
915 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by LawB10
-
You could also change the foundation to monolithic slab, that changes the floor structure to 4" Keep in mind your going from an old standard to a new standard
-
What solver said, go out and buy a printer, they are not that expensive.
-
I agree with Jo Ann and Solver... You have Suite 2014, it will not open the 2016 version, only 2014 and below... How about posting the plan you have now....
-
Here you go..... Lowered the ceiling height to 60" Change the side Rails to full gable and lowered the pitch on all rails to 6" Resized the Porch 030816e-1.plan
-
Lower the roof pitch for Porch, you can also gable the side walls
-
The link you provided is for Chief Architect Premier software.
-
To fix the problems you were having with the lower part of the wall. The whole building is concrete and blocks, why you built it that way is beyond me. If you would have use Brick instead of Concrete stem walls, you would not have had those issues. On the 1st floor you used concrete wall for columns Go to the library and use the columns there. Last, Did you try it?
-
Try editing the floor structure for the 2nd floor slab
-
I just stumbled upon a fix for this issue, to keep the wall and winders, use a pony wall, it will not follow the stairs.
-
You said that nicely LMAO
-
Kat, I think you misread what I said... Please, If you would go back read you're responses.
-
Jo Ann, Please take another look at the pictures..... The 2nd floor room is 33 X 21' 10" after making adjustments the tutorial Saltbox is of no use. The Garage is also a Saltbox with the back-end about 6 to 7' high and the Gable wall Pitch looks to be 12 The eave overhang looks to be 6 or 8"..... after making the adjustments to match the pic the ceiling heights are lower Your build is to high LOL.
-
The problem with the material definition tool is that applies the material to everything in the plan that has the same surface. That includes appliances, door and cabinet fixtures and lighting fixtures.
-
David, The same thing you did in the Video is what I had done. The issue is when you use winders instead of landings, it screws the wall up, for some reason the wall follows the stairs even if you move the wall away from the stairs.
-
Thanks, When you create the terrain perimeter the Garage sits low, the room floor above the Garage is to high and there's issues with the roof.
-
Your Welcome, Click on the rooms and walls to see what was done, There are no knee walls , to reiterate DO NOT make any changes until auto rebuild roof is unchecked Then delete the Garage and 2nd floor wall, and click the the Defaults for those rooms. The roof will not change..
-
Jo Ann Both the Main house and the Garage are Salt box roofs as you know you can't edit or manually build roofs and dormers in Suite. The way the Dormers sit on the house you will have a problem if you create a salt box using the tutorial.
-
Auto rebuild roofs is on before you make any modifIcations. TURN AUTO REBUILD ROOFS OFF!!!!!
-
Download a trial of HD 2017 any version.... Here is the plan to show what was done. roof2.plan
-
Here's what I came up using Suite 2016.. I use the Landing tool to create the winders. winder.planwinder.plan
-
Here's what I came up with... keeping auto rebuild roofs on. On the 1st floor: Created three rooms for the garage and Gabled the end wall The lower room is 108" no change to the middle room upper room 88 3/4" Created a 2nd floor and created 2 rooms, the lower room 8 to 10' wide Gabled the end walls Lowered the 8 to 10' room ceiling to 0 the upper room to 60" clicked on the upper wall and lowered the pitch to 6" Change the plan default eave overhang to 12" for the Gable walls to 4" the auto roof return is 12" Turned off auto roofs and reset the modified rooms back to their defaults and delete the walls.
-
Are you trying to build with the added Bedroom? because the plan doesn't match the pictures....
-
Click on 3D>3D Backdrop....
-
Sir Keith, When you open the HD Pro 2016 , click on File, a drop-down box will appear with options. Click Open plan...the software goes to the directory where you're .plans are located. Keep in mind Sir, you may have to tell the software where you're plans are located on the computer.
-
No, the software saves in the version that's used. To save for other versions you would have to upgrade to Premier. Download the trial version of 2017. Here is a copy of what I did. ICF - Russ R6 Lodr.plan
