Jo_Ann

Use a full wall for the ceiling height wall. As DJP suggested, use a half-wall (same as solid railing) for the slanted wall. You may have to play with it's placement until it takes on the slant of the stairs. You can adjust the wall's height in it's dialog box. Delete the left stair railing. You then have to manually place (and size) ballusters and newells from the library (library/millwork). Use a sloped soffit for the rail.

DJ, While in 3d view, select the object (that you placed the number on) with the rainbow tool. In the window that pops up, choose 'stretch to fit'.

DJ, How did you add the png file to 'my library'? Did you add it as a new 'material'???

DJ, If you follow the knowledge base tutorial (and do a lot of finagling) you can get something like this. Use the 'flat region' tool to maipulate the terrain.

DJ, I don't understand what you are saying about the numbers sticking? I see them in your last pic? You applied them to a soffit, correct? You then move that soffit up against any surface that you want the numbers to display upon. For your terrain stairs, look in the knowledge database: http://www.homedesignersoftware.com/support/article/KB-00498/71/Home-Designer/Stairs/How-to-Create-Stairs-in-Sloping-Terrain.html

The green strip on the corner... Build/trim/corner boards. Open the corner board (after applied) and set the width. In 3d view, select and alter the height.

Looks like you've got some wonky terrain issues going on, too. Also...If the particular terrain problem showing the level 0 footing (garage side) is caused by the cantilever from floor 1, place a grass textured soffit at that terrain level to cover it up. P.S. What is that unsupported thing ( roof?) in front of the front porch entry?

Mick. I'm not understanding what you are doing with those ceiling heights. All the ceilings are 84". I did the livingroom with a second floor. I measured the ceiling at it's peak by using a tall soffit, and it is 9' 5". The only way (I think) to lower it is to decrease the pitch to 5/8" (creates a perfect 9' ceiling), but that doesn't look as good as the 3/4" pitch does (on the exterior). Is the main floor of the house cantilevered over level 0?

Mick, Room heights are 7' and the high shed rises (I hope) to 9' (as DJ specified). All of the new titles list the minimum operating system as 'Vista". I have XP, so it would probably be a waste of effort. My nvidia card runs excellent for my current title, but it would probably flounder at running Pro. P.S. I'm really disappointed that the post options don't have a 'crying' smiley!

Wow! My 'just guessing' plan has exactly the same pitches! Very shallow pitch! Odd that it doesn't look 'flat' in 3d view. Thanks for the floor plan, Mick.

Mick, I don't know what settings DJ has, because my older program will not open the plan file. DJ, If you would post a full jpeg image of the 2d plan, it would be helpful. Also, what is the roof pitch?

Like this? DJP is correct. You must add this png pic (number) to your 'my library'. You then place a soffit on the ground, and make it a very thin height. Open the soffit and apply the new material to it. THEN move the soffit over top of the concrete where you want it, and re-size it (the soffit) to the size that you want the numbers to appear to be.

It appears that you still have a problem with your high shed roof? About the numbers: Do you have photoshop or any image editing program? What are the numbers that you need?

Look in the library under Architectural / Cabinet Doors,Drawers, and Panels / Specialty Storage / Wine Rack.

Like this? To begin with,not enough info given. But this version was done with a second floor where the high shed is...and a LOT of finagling.

You appear to have 3 different ceiling heights. Play with the ceiling heights and the roof pitches, and it will build this way.

Thanks, David! I can't do a video, so I've emailed the basic plan to you.

You can do this with Suite. This is just an example--your own dimensions will determine what the settings are for your roof walls (and they are very specific). You will need to play with those settings until you get it right. The red walls are the 2nd floor walls. When the roof is correct, then turn off 'auto build roof', and THEN you can raise the finished ceiling height of floor 3.

The shaded walls are railings designated as 'invisible'. The front (right side) railing wall (railing tab) specifies 'no rail' and 'post to ceiling'.

YES, it DOES matter which program you have, because Suite probably does NOT have that option. Just guessing. You also need to list which version you have (15?). You should add this to your signature.

David, When you turn off 'auto build roof' and delete the extra walls, you will then REJOIN the existing walls and it will no longer be a seperate structure. I would do a 'save as' on your plan BEFORE turning off the 'auto build roof'. You can then do your remodel in the 'saved as' plan (with the separate structure, which will maintain the flat roof). You can do as many 'save as' remodels that you want. You wil still have the 'as-is' plan, and the 'to-be' plan to show the contractor. When you settle on a final remodel, you can turn off the 'auto build roof' then rejoin walls on that plan, too.

I found that when lowering the roof pitch of the addition walls, it played havoc with the rest of the roof. Sooo, make the addition separate, as shown. When the roof is correct, lower the finished ceiling height so that the facias match. THEN turn off auto build roof. Now you can delete the extra walls and re-raise the ceilings. You CAN NOT rebuild the roof again, or you will change this roof.

Uh...NO. Home Designer 2014 has 5 listed titles: 1. Interiors 2. Essentials 3. Suite 4. Architectural 5. Professional

Place a base cabinet, and open a 3d full camera view. Open the cabinet dbx to 'front' tab and delete the toekick, then the door. Back in 3d view, select the cabinet and grab the size handle at the bottom and pull it up (to whatever height you want the drawer to be). You can make the drawer wider, a double drawer (dbx/front tab), or change the handles (door/drawer tab in the dbx). You can also extend just the countertop by using a soffit or custom countertop.

I've been thinking about the stairs, and it sounds as if you haven't built them yet (in reality). So...unless you're a really short person, I think you're going to whack your head on the ceiling at that landing.