solver

Edit>Delete Objects.

The room above the garage has a short ceiling height. Guessing you did that to get the roof where you wanted it, with either auto or manual roof planes. The program sees everything above as attic. Once the roof is correct, or if you are using manual roofs, raise the ceiling to where it should be. Like David mentioned, no need to be building framing until the end of the process, but it is good to leave Auto Rebuild Foundation on, so as you move walls the foundation responds. Check your 2nd floor walls too as several don't align with the walls below. I'd also suggest auto building the roof, until it becomes too much effort to get just what you want, then switch to manual.

Where? What walls?

It does -- it does it automatically. You just cannot specify the insulation. I don't understand this. Start a new plan. Draw 4 Siding-6 walls to form a room. Build framing if it's not already and take a 3D framing overview.

So you want multiple layers of insulation within the stud bay. I cannot think of a way to show that, and I'm not sure you need it. This is the materials list for a default wall and it shows wall insulation. Isn't this really all you need to calculate your materials?

Are you saying there will be no insulation in the stud bays?

You cannot change this in Suite.

See Use Soffit Surface For Ceiling.

Read about Lower Wall Type When Split by Butting Roof.

See if this thread helps.

What are you trying? Show some pictures (screen captures) so we see what you see.

Draw a truss, open it and change the settings. That said, you would not normally have a roof truss built like that. Your truss package will be designed by the truss manufacturer based on your plan, but not on any trusses shown in the plan.

You have drawn roof trusses that are interfering with the framing. Here I deleted them and built roof framing.

Please post images directly -- no need to make a PDF of an image. This makes it easier for others as an image shows in the forum. Generally, with structural issues someone will need the plan file to see what's going on. Why is having framing important to you? Have you tried drawing the dormers manually, or exploding an auto dormer and drawing manual roofs etc.

Yes, HomeTalk is for all titles of Home Designer products, ChiefTalk is for the Chief Architect branded products. What do you need help with? There are many free resources for learning the program -- just takes time and a bit of effort. There is a tutorial access via the Help menu, Chief has a YouTube channel with good hour long getting started webinars that go over the process. There are articles and videos on the Home Designer website.

You want to raise the porch roof until it matches the roof to its right? Auto roofs build over rooms, so raise the ceiling height in the Porch room. And Architectural only has auto roofs, you would need Pro to do manual.

No -- just something that needs to be done manually.

I'm guessing you transferred your active license? And then you transferred your license back. You need to copy your plan file from system to system manually -- did you do that?

Help others by saying what you did

Try not to reshape wall top and bottom, unless there is no other way. And keep in mind that when you change an auto generated Attic wall, the software will no longer automatically rebuild it. By changing it, you have taken ownership. On the front porch. You can use the same Pony Wall trick to get the program to fill in the gap.

Nothing to do with Layers. You have dragged the bottom of the gable wall down, probably in an effort to cover something. OK -- looked at the plan. Here is what I see. Watch on YouTube: http://youtu.be/G_DVWPceABY?hd=1

That's usually an indication there are 2 walls in the same space. You can usually tell by selecting in a camera view. You will see how walls overlap.

Do you get audio on other videos? YouTube, for example. Have you tried another browser? I'm not familiar with Mac, but believe Safari is the default. Check to see if a Chrome version is available.

Select an object, look in the Status Bar.

Someone will need to look at your plan file to answer. Close the program and attach like you did for the image.