RobynKS Posted November 19, 2014 Share Posted November 19, 2014 Hi all as per my picture I have a wrap around veranda that I added to the main house. My end walls do not follow the roof plane. I built the veranda roof planes manually. I have selected the walls and called them shed walls also tried calling them gable walls. Would appreciate some help. Thanks Robyn Link to comment Share on other sites More sharing options...
solver Posted November 19, 2014 Share Posted November 19, 2014 You could try drawing an attic wall, or check the option shown in the image Link to comment Share on other sites More sharing options...
Kbird1 Posted November 19, 2014 Share Posted November 19, 2014 select the wall in an elevation view and drag the wall's 3D Polyline upto the Roof manually if needed but you may also try hitting F12 for a 3d rebuild or check the rebuild Walls/floor/ceilings box on the Build Roof DBX ,without rebuilding the Roof as well placing an Attic wall should work too though isn't usually needed. M. Link to comment Share on other sites More sharing options...
DavidJPotter Posted November 19, 2014 Share Posted November 19, 2014 You have already been given some workable advice by Eric and MIck. I just thought I would point out that roof derectives such as "Shed Roof, High Shed Gable, Gable Roof etc" are mainly for auto-roof generation and have no effect or little direct effect on manual roof editing or creation. "Roof Cuts wall at Bottom" is a manually important command whether editing manually (usually done manually) or automatically but has a very specicic purpose and effect. DJP Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now