Nistafy

Need Help!

Recommended Posts

Help!  I have a rogue roof overhang coming out of a two story at the one story level.  It shows in the floor plan on floor 1 as a green dotted line.  I cannot select it, nor can I get rid of it!  Help me to get rid of it!! Please......

Screen Shot 2017-09-20 at 6.08.02 PM.png

Share this post


Link to post
Share on other sites

1) Please fill out your Signature -- see below.

 

2) We need to see your plan file. Make sure it's not open in your software.

 

--------------

 

It helps if we know what title (Suite, Pro etc) and version (2014, 2015 etc) you are using. You can add this info to your signature by clicking on your user name at the top right of the page, click Account Settings, then Signature on the left. Doing so makes it always available, and this info is often key to providing a good suggestion

 

Resources for self help:

 

The built in Help System (always a good place to start)

 

 

 

Share this post


Link to post
Share on other sites

I have checked al those places and I cannot find anything that addresses it.  Signature now established.  I am running HomeDesigner Suite x9 (2018)

 

Share this post


Link to post
Share on other sites

We need to see your plan file. Make sure it's not open in your software.

Share this post


Link to post
Share on other sites

Yes, posting your plan file is what I was wanting. There are so many interrelated settings it's really the only way to look at many problems.

 

As for your roof. It is caused by the raised ceiling -- above the dining and below the master.

 

I don't know why the roof is generated, and I don't know what you are wanting to model -- your ceiling heights etc, so cannot be much help.

Share this post


Link to post
Share on other sites

I want the lower ceiling over the kitchen and the higher ceilings over the dining/music....  If I change that ceiling to be lower as the kitchen is, the roof panel is still there, so I do not think that is the cause... I have tried deleting the entire alcove and re-building it, it keeps showing up

 

Share this post


Link to post
Share on other sites

Delete the two highlighted walls and the roof plane goes away.

 

ht1.thumb.jpg.579a48d0db93471f602fdf8da72425d9.jpg

Share this post


Link to post
Share on other sites

Thank you for your help.  I am new at this, and am learning as I go... I deleted the room divider wall between dining and music and it disappeared.  I still have my stepped ceiling which is good.   Now if I can figure out how to put a roof over a deck that is a different pitch than the default roof pitch... 

 

Share this post


Link to post
Share on other sites

First, uncheck invisible for all walls, and use doorways.

On the second floor delete the walls that's over the first floor bathroom they are not needed.

To get rid of the roof problem, move the Master bedroom wall to the right about 3" or so.

 

If you raise the ceiling heights on the first floor, you raise the floor heights on the second floor, which means

you have to draw stairs to get to the door.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now