Raised ceiling over stairs without opening walls


Recommended Posts

I have a half height room over the landing of my staircase.

 

There doesn't seem to be any way to make the height of a single wall on the bottom floor taller, so I made the floor of the room in the 2nd floor higher.

This works, but it leaves the wall open beneath it.

Is there a way to keep the wall of the bottom floor closed when raising the floor of the upper floor?

 

image.thumb.png.06ee34ec1ac7e6a7c8268a52d3557193.png

Link to post
Share on other sites

The room over the stair should not have a floor. It sounds like it needs a lowered ceiling and be set as Open Below.

 

 

Link to post
Share on other sites

Thanks for responding so quickly!

 

Changed the room to Open Below but the walls of the room over the stairs are still blocking the stairwell.

There area between floors isn't exposed now, but can't seem to make the walls go higher with Open Below like they could with a bedroom or closet.

 

 

 

 

 

1st floor

image.thumb.png.e87db1bb83ddcdb140f267cf1a0f0132.png

 

 

 

 

 

 2nd floor 

image.thumb.png.326a2808e833a0ad9c03a25ab803d34f.png

 

 

 

 

View from first floor up the stairs
image.thumb.png.3d6034962d0078e92ca1e1e6bf2ea87c.png

 

 

 

image.png

Link to post
Share on other sites

Pictures of the actual house would help, but try breaking this wall and making the problem part invisible.

 

ht1.thumb.png.ca851c776941b0a3234423e7d07d0f7f.png

Link to post
Share on other sites

Tried making the wall invisible, but then the room's wall was invisible too.

Here's some pictures of the real thing.

 

image.thumb.png.30a5942914abf2975a8b58cbe13ff905.png    image.thumb.png.874ecac20d8603854813ff107fcc36f2.png    image.thumb.png.6df4d5c6eecdc480ab184d9531dcd210.png

Link to post
Share on other sites

Thank you @Jo_Ann though it looks like I'm doing the same thing? 

Not sure if I messed up some other setting. Maybe it was using the auto-stairwell functionality?

 

 

image.thumb.png.ecb6757cf2e17e236b0d5cdcdf0add44.png

Link to post
Share on other sites

Reviewed your picture for hours, attempting different manipulations (room types, adding a room below, making sure walls are aligned, etc.).

Checked that the stairwell I have is classified as a room below.

There's no option for a 'half-closet', not sure if that was your custom naming or something I don't have in my version.

All the measurements in the dialog appear to be consistent.

I'm unable to have an open below in front of the room because the house isn't structure that way.

Tried replacing the wall with an exterior wall, but just got a wall with the siding stripped away showing the wrapping underneath halfway up.

 

In the end, I stumbled on making it work by moving the walls further out.  It looks like something was demanding a certain size that was clipping the walls.  Still don't know what that was.  Tried resizing and deleting the staircase, but there was still something demanding the room be at least 3'6" by 7'11".

 

If there's something you're aware of that I didn't list above, it would be great if you could point it out.

 

Link to post
Share on other sites

It's always helpful to have the plan file to work with. Others may see exactly what you are doing and make the best suggestions. Close Suite and attach as you would an image.

 

The way you control floor and ceiling heights is by creating a room.

 

From above -- see how the small closet is a room and how the default settings have been changed.

 

ht1.thumb.png.d4d9845edda38c2f25f1e187d920c7ec.png

 

 

Another way of doing this is to use a soffit to create the small closet so it looks good in 3D.

 

 

Link to post
Share on other sites
  • 2 weeks later...

Thanks for sticking with it Solver!

 

It looks like the whole problem was because the walls were not exactly aligned above one another.

Raising the floor of a room appears to create a cutting plane (volume) underneath the room that doesn't affect anything if the walls are aligned, but if they aren't it can skin the wall below.

 

Tried to align the walls, but nothing worked until I copied the wall in place from below and pasted into the second floor.

Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now