rfcomm2k Posted October 10, 2017 Share Posted October 10, 2017 I have a house design started and have now reached a point where I need to establish the starting elevation for first floor (instead of being 0 it needs to be 26"). Is there a way to change that starting elevation (it is grayed out) and have all other elevations update for every floor, or do I have to manually do each one? Link to comment Share on other sites More sharing options...
solver Posted October 10, 2017 Share Posted October 10, 2017 Why does it need to be raised? Link to comment Share on other sites More sharing options...
LawB10 Posted October 10, 2017 Share Posted October 10, 2017 You may want to send this to tech support and ask why that option grayed out in default settings. Link to comment Share on other sites More sharing options...
rfcomm2k Posted October 10, 2017 Author Share Posted October 10, 2017 Eric, it is for a tiny house on a chassis, and we did not have the chassis ground height before. Now that I know the height from ground to top of chassis, I want to set the bottom of the house at that height so I do not need to constantly remember that dimension when working on the floorplan. Link to comment Share on other sites More sharing options...
solver Posted October 10, 2017 Share Posted October 10, 2017 Posting images is almost always helpful. Is this what you are asking about? Link to comment Share on other sites More sharing options...
rfcomm2k Posted October 10, 2017 Author Share Posted October 10, 2017 I hope that is what I need. Will try it and see. There is really no image to post that would show the issue. I just started the floorplan using the default floor height because I did not know what the correct height would be and did not want to delay the design process by 2 months. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now