solver

35 minutes ago, DaveHicky said:

Can any one help

What sort of help do you need?

30 minutes ago, Rising_Sun_Homes said:

Is there a method that can be utilized to generate ramped / sloping swimming pool depth transitions

No -- not anything that will blend and make smooth transitions.

Then you are doing something wrong ...

Research Temporary Dimensions.

Often a forum search will find an answer.

Searching for centered would be a good place to start.

Here is some info on searching: 

I don't do much with terrains, but took a quick look at your plan.

I believe the lines you see are generated based from the elevation points you have placed and cannot be directly edited.

You can, I think, add or adjust points, or add other modifiers like I've done here to influence how the terrain is generated.

I changed the line weight of things and turned on Show Line Weights so they would be visible. Also changed colors.

Suite lacks any framing tools.

You may be able to use an additional floor set to a short -- maybe 0" ceiling height to help fake the look.

This might help you.

Have you checked the Bonus Catalogs?

Problems like this need help from Chief.

2 minutes ago, JoeHCC said:

I Have Chief Architect Premier x10.

You need to ask Chief. This is a user to user forum and cannot answer questions like this.

Also, this is the Home Designer Forum. Chief is discussed on ChiefTalk.

https://chieftalk.chiefarchitect.com/

But it's the same -- still need to contact Chief directly.

3 hours ago, YogiBear said:

Will upgrading my driver help with these issues?

Maybe

Search Help for icons.

17 minutes ago, RobE30 said:

Could not figure out how to make them room dividers

Fill in the corner with 2 Room Divider walls. Make the room they create Open Below.

Attach the plan file and I'll have a look.

Make sure your safe room walls are all NOT marked No Room Definition.

If that does not fix it, attach the plan.

The problem is there are no tools to manually edit the end shape of a framing member, like you would need to do where the 2 roof planes join.

Getting the program to auto build correct framing may not be possible.

1 minute ago, Jeffrshea said:

I have swapped my license onto a new computer.

Is this a new install, or something that was working before? You can move your license between multiple machines.

4 minutes ago, Jeffrshea said:

When I check this option from the drop down box nothing happens.

The program window is maximized?

15 minutes ago, Kgoodwin243 said:

I plan to have the 6x6s continuous from the footing to the beam above for the roof trusses, and hang the triple 2x12 deck beam between the posts using a concealed-flange triple joist hanger, then hang the floor joists to the back of it.

All done manually. Post generated as part of a railing cannot be manually manipulated.

No program that I know of will input those things for you. How could it know what is needed?

You would normally build up your own library of details and notes and use them as required.

26 minutes ago, wranch said:

I am confused why this won't generate symmetrically.

Not something anyone can answer without knowing exactly the steps taken.

Attaching the plan file (close Pro first) will give someone something to experiment with.

This gap is caused by the default post/newel spacing. Increasing it to more than the length of the railing should eliminate it.

Otherwise, looks good.

24 minutes ago, wranch said:

I am left with mismatched top of plate values and the way the roof generates at the connection between upper and lower pitches is a mess. 

Did you Join (with the Join tool) those 2 roof planes?