solver

Members
  • Content Count

    5593
  • Joined

  • Last visited

Everything posted by solver

  1. solver

    2nd Floor Floor is not Showing on 3D Displays

    I see you mentioned Pro ... Answers often depend on which title (Suite, Pro etc) and version (2018, 2019 etc) you are using. You can help everyone by adding that info to your signature (see below for how to turn them on) by clicking on your user name at the top right of the page, click Account Settings, then Signature on the left. Doing so makes it always available, and keeps others from having to hunt for it. And, turn on signature display too. ---- Resources for self help: The built in Help System (always a good place to start) Getting Started Knowledge Base YouTube
  2. solver

    Double Gable Issues in HD Architectural

    Looks like Architectural does not have that option. All the videos use Pro. Do you just want to fill in the wall, or does the roof need to change too? You may need to use an Inverted Wedge, and a Wedge from the library to fill in. You would need 2 of each, one for the interior finish and one for the exterior.
  3. solver

    Double Gable Issues in HD Architectural

    Read about Roof Cuts Wall at Bottom. And I see you said Architectural ... Answers often depend on which title (Suite, Pro etc) and version (2018, 2019 etc) you are using. You can help everyone by adding that info to your signature (see below for how to turn them on) by clicking on your user name at the top right of the page, click Account Settings, then Signature on the left. Doing so makes it always available, and keeps others from having to hunt for it. And, turn on signature display too. ---- Resources for self help: The built in Help System (always a good place to start) Getting Started Knowledge Base YouTube
  4. solver

    How to Create Angled Bulkhead?

    Inverted Wedge in the Library.
  5. solver

    Bonus Room Dormer

    And don't use a Floating Dormer.
  6. solver

    Bonus Room Dormer

    That's not an auto dormer. I just used the walls you had drawn that extended to the face of the garage. If you want an auto dormer, remove that bumpout you drew.
  7. solver

    Bonus Room Dormer

    This is auto built, and just a guess at what you want. Just think about how roofs build and adjust your 2nd floor room ceiling heights and walls to get the roof correct.
  8. solver

    Bonus Room Dormer

    What's the problem? What does the new dormer need to look like? Have you searched the forum for dormer? DJP and I have both posted videos recently.
  9. solver

    Copy and Paste a Room or Rooms

    You cannot copy/paste rooms with any Chief Architect/Home Designer product. You can copy/paste walls that form rooms. The more expensive products have tools to facilitate this.
  10. solver

    Roof planes show as dotted lines

    Your camera is using the Default Layer set instead of the Section View set. Delete the camera and open a new one.
  11. solver

    Roof planes show as dotted lines

    You should use zip format too. Not everyone is able to work with 7z files.
  12. solver

    Roof planes show as dotted lines

    Try again to upload the plan. There is a 25MB limit on size. Close Pro, Zip the file and try uploading the zipped file.
  13. solver

    Shed Dormer

    This is from a previous thread. Watch on YouTube: https://youtu.be/R9Chn_LQO1M
  14. solver

    Island Pendant Light

    Chief lets you create and modify symbols. In this case, I added a stretch plane as seen here. Say you want a specific garage door, or cabinet door that is not in the library. You create one. You can easily add moldings, and create your own molding profiles. Layouts may have unlimited pages. Real Layers -- you can create layers and layer sets. Basically there are many advantages to Premier, but it really depends on your needs and what your customers expect. To stay current with Chief will cost about $600/year. There is much to learn with Chief too. Everything you know about Pro will transfer, but to fully utilize it will take study and work. Download the trial and spend some time with it and the documentation.
  15. solver

    Copy and Paste a Room or Rooms

    You can copy/paste walls that create rooms, but Architectural is limited on functionality. Pro would make this much easier.
  16. solver

    Island Pendant Light

    That particular light has no stretch zone defined. Here is one that works, but the chain will not look too good as it's short to begin with. Save this file, then drag it into an open Pro window to import. The symbol will be in your User Library. Dover Pendant.calibz
  17. solver

    Island Pendant Light

    Wasn't me. I gave you 1 to get you back to neutral.
  18. solver

    Island Pendant Light

    Symbols are usually set to stretch correctly, so in a camera view if you select the light and drag it down, it will stretch along the chain/shaft and the light fixture will remain unchanged. You can make the same adjustments via its dialog too. There is a Help button in each dialog that will open Help to the correct section and often a bit of reading will answer a question. Also, just experimenting with the settings will often find the answer.
  19. solver

    Interior Dimensions

    They are beginning to discourage auto interior dimensions and have even removed the tools from the toolbar, but you can add them back. I'll suggest again that you try using Temporary Dimensions as they only show when an object is selected. Quick video Watch on YouTube: https://youtu.be/MjU6T5nG4Qw
  20. solver

    Interior Dimensions

    You should consider creating a new template once you have things setup as you like. That way, all new plans will pick up your defaults. I posted a how to in Tips & Techniques. Search for template. Dimensions in general. I would recommend you experiment with using Temporary Dimensions to locate things. This will keep the clutter down. Once you have things positioned, or as needed, add manual dimensions. Here I placed a window, clicked on its interior side and temporary dimensions allow it to be positioned. You probably want to set your dimensions to locate wall surfaces too. Edit>Delete Objects Choose to delete Auto Exterior Dimensions and the program will ask if you want to turn them off -- say Yes. You can turn off Auto Roofs there too. Not auto interior dimensions. I'm a bit confused. Maybe a couple of screen captures would help show the problems. Your window size does not include trim. For example, the 32" wide window shown above with casing would be 37.25" to the outside of the casing.
  21. solver

    Floor Questions

    No -- images, zip files, plan files all work.
  22. solver

    Floor Questions

    Are you getting an error? There is a 25MB limit per upload. It cannot be open in Pro, and you can try zipping it.
  23. solver

    Floor Questions

    I'm sure it would help Rick to have the plan file to review.
  24. solver

    Shed dormer help

    One click to place a dormer in your plan using Suite 2021. Because your version lacks the tools, you need to do it the hard way ... I know that's not very helpful.
  25. solver

    Floor Questions

    The forum is about using the software, not about what you are designing with the software. Your engineer will give you what you need in the way of structure, and if you then need help implementing them into your plan, that's where the forum might help.