Matconinc Posted March 17, 2019 Share Posted March 17, 2019 My questions are about truss design renderings (attic truss) The cross section i created does not so all of the truss component correctly jpeg hdpro When i place the truss at the gables it will not render a gable truss correctly even if i do end truss force rebuild or jpeg hd pro1 or end truss force rebuild it will not fill in the attic portion at the gable jpeg hdpro 2? Do i need to create a different truss at these locations ? Thanks Link to comment Share on other sites More sharing options...
solver Posted March 17, 2019 Share Posted March 17, 2019 You will need to post your plan file so someone can look at it. Close Pro first. Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 Okay here is the file thanks math24x28.plan Link to comment Share on other sites More sharing options...
solver Posted March 17, 2019 Share Posted March 17, 2019 If this is what you want to see, I turned on the display of trusses as I said above. I do not know why the end truss is building with the large gap. I do notice the the bottom cord of the attic trusses is above instead of below the floor. Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 Yes that is what i want to see it will work for what i need for cross section to show all of the truss components there is quite a bit of modifications you have to perform to apply trusses to the design create second floor make invisible build walls label as knee walls define atti space etc. thou i don't see your thread about display trusses that you mention it is in display options and you check display trusses correct the floor should not be displayed thou i most certain i had truss display on Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 Thank you solver if you can find out why the floor is displayed and the gable does not fill in that would be helpful Thank You Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 Solver how did you get the truss to show up i can't get it to render the truss completely i check truss display ? Help Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 never mind i figured it out thank you anybody that could let us know why the gable trusses wont fill in would be great Thanks again Solver Link to comment Share on other sites More sharing options...
solver Posted March 17, 2019 Share Posted March 17, 2019 Did you delete a thread this morning? I replied to one showing how to make the truss display. For the end trusses, select one of the end walls, set it to No Room Definition. Select the end trusses and force rebuild. They should build correctly. Uncheck No Room Def on the wall. Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 oh okay thanks will do and i'm going back and redoing trusses as i believe that i drew the trusses on the wrong floor i placed them on the second floor which actually isn't there in display mode but i think i need to draw them on the first floor walls and that would remove the ceiling joist does that sound like the issue Link to comment Share on other sites More sharing options...
Matconinc Posted March 17, 2019 Author Share Posted March 17, 2019 That is why the floor showed up you have to draw the truss on the correct floor being first floor as you only create the second floor to have a ceiling present in order to craete the truss .Maybe there another way ut i followed the reference manual to create them but i missed one step Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now