2 Inverted shed roofs in front and gable in back design problem

[DominiqueS]

I do not seem to be able to reproduce this roof which has a different front and back

The back is a regular low pitch gable roof while the front has 2 inverted shed roofs.

I have just purchased Studio and dowloaded Architect trial to see if it would help but lack of knowledge could be the issue.

As per one of the videos, I have added a wall in the garage and removed the roof from the space create.  Change the wall "roof" parameter to high gable and I was able to create the 2 inverted front shed roofs.  But I have no clue as to make a regular low pitch roof in the back. 

 

Can anyone guide me in the right direction.  

 

I have included some pictures.  Hope you can see them

Roof satellite view.tiff

Pink House Original.plan

[solver]

Looks like you have some settings wrong on the back part of the house. Check walls to make sure nothing extra is checked.

 

Set the pitch on the 2 outside walls -- you may need to break them where the shed roof stops. Set the end wall to full gable.

 

See how the roof builds. 

 

You can post the plan file -- make sure it's closed in Home Designer, for better help.

[DominiqueS]

The end wall was already full gable but removing the high gable on the side walls improved dramatically but changed the front left of the house to a gable.  I am trying to post the picture.  But it is much improved.

Many thanks.

[DominiqueS]

https://www.homedesignersoftware.com/support/article/KB-00492/building-a-clerestory-roof.html 

gave me the solution.  I needed to make the left room ceiling lower to separate it from the right side.