Abutting roofs sharing a wall, but different pitches


BVbuild
 Share

Recommended Posts

Hello,

 

I am a very new user to the Home Designer Pro 2021.

 

I’m designing a house that will be built in two phases.  Phase 1, a 3 bed ranch house with a 7/12 pitch.  Phase 2 will be the addition of a 2 1/2 car garage with a 12/12 pitch so that a studio apartment can be built in the attic.  The planning department want to see both phase 1 and 2 drawings before issuing the permission.

 

The building are 2 rectangles, the house 44’ wide and 28’ deep, the garage 28’ wide and 24’ deep.  So the back of the building will be 72’ long with the left hand wall 24’ deep and the right hand wall 28’ deep, with an abutting wall in the middle.  Both ends of the building will be gable ends.  A simple roof except for the different pitches.  (I figure when we get to building a fancy flashing will cover the join)  My problem is that when I build the roofs they won’t build as 2 separate roofs.  If I set the pitch at 12/12 for the garage this comes over onto the house roof. And weird valleys design themselves. 
I’ve put a break in the 72’ wall. Even then if I select the back roof on the 3D view it still selects both the garage and the house roof.

I select each wall and assign it a pitch or assign it as a gable end (including the abutting wall between the garage and the house).

 

Any suggestions?

Link to comment
Share on other sites

One other thing...the program seems to be trying to keep the ridge height the same over both buildings.  My intention is that they will be different ridge heights, but I don’t seem to be able to turn this off either.

 

Link to comment
Share on other sites

 

*** I see you said Pro 2021 ***

 

 

Answers often depend on which title (Suite, Pro etc) and version (2018, 2019 etc) you are using.

 

You can help everyone by adding that info to your signature (see below for how to turn them on) by clicking on your user name at the top right of the page, click Account Settings, then Signature on the left.

 

Doing so makes it always available, and keeps others from having to hunt for it.

 

And, turn on signature display too.

 

SIG.thumb.jpg.af17109346e9446432098056e258623d.jpg

 

----

 

Many questions have been asked and answered. The Home Designer website is a good place to start your search.

 

Here is a video about searching the forum: https://youtu.be/dDT6wbrrVRM

 

 

Resources for self help:

 

The built in Help System (always a good place to start)

 

 

 

 
Link to comment
Share on other sites

1 hour ago, BVbuild said:

Any suggestions?

 

The simple solution is to learn and use the manual roof tools.

 

There are videos available to help with both manual and auto roofs -- see the links above.

 

A couple of suggestions for the future.

 

Pictures = Good

 

All Words = Less Good

 

Pictures and a few well chosen words = Best

 

Images are usually best in Vector View, unless your question is about Standard View rendering.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share