rv4life

Thank you so much. That worked.

Thank you for the reply and for the signature reminder. I've searched for the problem but can't seem to find it.

Hello, I have Home Designer Pro 2022 and it's been awhile since i've used the product. I'm trying to raise a ceiling height between the ceiling and OSB while keeping the upstairs floor the same height. Is there a way to "close" the gap slightly? I've attached a screenshot showing the "gap." Thank you, Shane

Thank you!

Thank you!!

Thank you!

I have Home Designer Suite 2015. Does anyone know where I can find a sign to go on a door that says "quiet please" or "baby sleeping"? Thank you! Shane

I have Home Designer Suite 2015. Does anyone know of any other sites like 3D Warehouse to obtain items? Thank you! Shane

I have solved the problem! I talked to technical support and they looked at my plan. The person said those rooms must have been assigned a different style of room or name. She had me delete the hallway wall that connects to the rooms, then delete any wall that would open up the hotel interior rooms to the hallway. This then matched the settings in the hotel rooms to the hallway. I then saved the program, closed out, reopened the program, and rebuilt the walls. The floor is now there and all the walls look normal. Thank you for all of your advice! Shane Carman

Thanks for the message. I have attached the floor numbers I used on each floor. I did originally use those rooms off of the main building as templates, copying them and then placing into the plan. Once the rooms were in the building, I would copy them using the edit area tool. I did the same thing for rooms on the first floor with no problem at first. The picture on the left is 1st floor and the picture on the right is the 2nd floor in my earlier post. Part of my second floor is functioning and has a floor while the other half does not. I just added a third floor to the building and had no problems. All of the rooms there have flooring. On the third floor, all of the rooms are the same so I copied the correct room from the second floor and duplicated it on the third. I tried what you recommended with the foundation and it did not change. I have noticed that the correct rooms on the second floor have a "ceiling below" of 102". In these rooms, default is checked for ceiling below". On the rooms with no floor, "ceiling below" default is not selectable and is stuck at 114 5/8". The pictures attached are the defaults for floor 1 and floor 2 as they currently are. Thank you again.

Thanks for looking at my plan. The options you have displayed for the floor on Room Specifications are not available to me. I don't know why. Here attached are the options that display for me.

Yes I do not have that option under structure. I have Home Designer Suite 2015.

I have Home Designer Suite if that matters.

Where can I locate this menu? Thank you!

Thank you for your help!

Does this link work? https://docs.google.com/uc?id=0B64tWtsMY6d1b0Y3ZFkzeEE0MVU&export=download It should have a button where you click download anyway and the file downloads.

Yes I did enclose the second floor prior to placing the rooms.

Thanks for all of your help folks! Here is the link to the DXF / CAD file: https://drive.google.com/file/d/0B64tWtsMY6d1U1NMcXBhcTVVOEE/edit?usp=sharing Here is the link to the actual plan file that opens the plan: https://drive.google.com/file/d/0B64tWtsMY6d1b0Y3ZFkzeEE0MVU/edit?usp=sharing If you go to the second floor, you will see that some of the rooms do not have a floor. I also noticed that the walls, mainly on the first floor, were all different in height. I went to areas of the building that did not have this problem and their finished ceiling height was 107 5/8". I went to the rooms with the issue and adjusted the finished ceiling height in most of them to 107 5/8". While this lowered the walls back to a normal level, it still looks strange and there is no upstairs floor. I would appreciate any support you can offer. Thank you!

Thanks! If I upload the plan, would you mind taking a look? Thank you again!

Should I be posting a CAD file? I tried uploading it and it was 18MB and too big.

How would I post it? I am new here sorry.

Gotcha. Mine are set to bedrooms and bathrooms. No open below. Thanks for the tips.

Thanks for the info. I set the rough height of the walls to 102", which seemed to lower the walls back to where they normally were. Some rooms will not lower to the same place and the rooms still have no floor. Also, where is the open below option? Thank you!

Hello, I am trying to model a hotel property. Everything has been going well until I noticed about half of my second floor rooms are missing the button floor and you can see to the first floor. This happened in the past on the first floor due to the foundation not being over the area or missing walls. That problem was quickly resolved. This time, I have checked all the walls, and they are all there. I noticed this issue because every time I would attempt to place a second story window, it would put it on the first floor. I have noticed that on the first floor, some walls are randomly taller than other walls. Could this be the issue? I have deleted and remade some of the taller walls but it keeps placing them at the same heights. I have attached pictures of the issue. Any ideas? As you can see in the pictures, the first floor looks normal but has odd wall heights that I cannot seem to change, and the second floor looks normal but has no floor where the walls had higher heights from the first floor. Thank you for your help! Shane Carman

Thank you for the feedback!