PLANsLLC123

Thank you for your help Eric and David.

The video was VERY helpful....problem solved!

Next challenge is the gable end exposed timbers....

Much appreciated.

Alright...one more time...plan is not open, it is being attached after the plan is closed...this is also the drawing in .plan format...not zipped.

thanks for your patience.

Tim

Floor_Plan;_Design__4_(HDP).plan

Hopefully this will get it.

Floor Plan; Design _4 (HDP)(COPY).zip

The plan is now closed, thanks.

Greeting,

This plan has had various things come up that I have had to become familiar with and appreciate the help along the way.

One last question, hopefully, concerns problems I am having with the walls below dormers not connecting.  My first issue was knowing I needed 2 x 6 walls under vs. 2 x 4, then aligning as closely as possible for Connect Wall function to work.  But, I am still having issues along one side of the building and don't know how to resolve.

If someone could point me in the right direction, it would be appreciated.

Thank you,

Tim

Floor Plan; Design _4 (HDP)(COPY).plan

Floor Plan; Design _4 (HDP)(COPY).zip

That did it!

Thank you for the help.

Tim

The attached drawing certainly has some fine-tuning to do, but I am stuck on one area that is critical to progress. 

I did something so the third floor is 'inactive'.  When I click on it, it does not highlight in gray and allow roof specifications etc.

If someone is willing to look at the issue I am describing and provide a suggestion on how to fix, I would appreciate it.

Thanks

Tim

Floor Plan; Design #4 (HDP).plan

Thank you both...I did look in Chief and had seen that article, as well as some Auto CAD sites, didn't see anything.

Thanks for the option to draw my own...

I have also tried "Print Screen" and looked for various Maps i.e. Google, MapQuest etc., but this seems like it might be something I should share if I find a remedy...

Thanks again,

Tim

I have introduced Vicinity Maps into my drawings using Google Maps and other sources, but jurisdictions have asked if they could be more legible.

Any advice on sources for good maps, or other ideas?

Thanks,

Tim

HDP 2016

All right.....I will look into it.

Thank you.

Tim

To All,

I need to draw lateral bracing across deck posts to a second story deck, but I can't figure out how to show these on the drawing...other than superimposing them over the elevation view using CAD tools.  I tried framing members, but it seems they are unable to pivot and I tried to modify a 'ranch' corbel, thinking it might be an architectural block I could explode to use the diagonal brace, aside from the top and bottom supports.

Anyway, I have attached the elevation view of my project, as well as page showing the local requirements for lateral supports and what is expected by local authorities.

Any help would be appreciated.

Thank you,

Tim

(A.2) Elevation View.plan

(A.4.2) Stair & Lateral Support Details.plan

Thank you for the response Solver.

After posting the previous message I did think to try and do the roof manually...I have attached the result.

Yes, it is a simple shed.  I built the roof framing manually, within the roof plane I created, however, the rafters are not visible when viewed from the underside.

I have attached an ORTHO view of what the deck supports are supposed to look like.

Also, the lower end of the shed roof sits over the eave of the existing structure...and the other problem I am having is not being able raise the room ht. of the structure to 8'-0", it wants to stay at 6'-8"?

Any ideas on that one?  I can not find what box I must have inadvertently checked to get the result of 'locking' the ceiling ht?

Thanks for the help...

Tim

(A.3.3) DECK COVER PLAN.planNickoli Ortho.pdf 

To All,

Hopefully the plan uploaded...

I am trying to put a corrugated roof over a deck, with exposed 2 x 6 rafters.  Am I on the right track with the attached drawing, and where should I go from here to make this work.

Also, having some fits trying to get my second floor level to 8' high ceiling.   It wants to stick at around 6'-10" ?  I must have checked some box incorrectly, but can not figure out how to resolve.

I appreciate any help offered.

Thank you,

Tim

Using HDP 2016

3D View; Nickoli.plan

To All,

Thank you for the help on barrel ceilings.

As it turns out, the client opted for the portion of the front deck in question to be vaulted vs. barrel. 

I have attached a perspective, if you are curious.

Thanks again,

Tim

Front Porch Elevation (Vaulted; BM incl.).pdf

Can barrel ceilings be created in HDP?

If so, how?

I have an area within my covered front porch that I would like to make a barrel ceiling under the gable roof.

I appreciate your help and suggestions.

Tim

Thank you for the advice.  I will continue to review videos and articles on manual roofs.

I somehow fixed this since posting the message.  One of the settings (can't remember which) had the roof setting 24" above ceiling plane?

Thanks again for the help,

Tim

To All,

I am just beginning to use Manual Roof mode in HDP 2016.  I have generated my initial roof section over the exterior wall, but in section view I see it is not sitting on the exterior wall, but has generated a 2'-8" 'Attic Wall' above the existing exterior wall for the roof to sit on.

I am sure one of my settings is off, but can not figure which it is.

Any help is appreciated.

Tim

Pelster Remodel-Front Porch & Entry.plan

Thank you Eric.

That worked!

Tim

To All,

While I have a ways to go on many aspects of this plan, my current problem is creating a slab floor, within the Covered Porch, that planes in at floor level.

I have tried "Garage", "Porch" and "Slab" Room Settings, but have the same result, the slab is placed on top of the footing and I am unable to bring it up to floor level without the stem wall height being reduced.

Any ideas?

I am using HDP 2016 and have attached the plan in its' current state.

Thanks in advance for offered help.

TimPelster Remodel-Floor Plan.plan

That did it.

Thanks again.

Tim

As a result of joining the main ridge of the building, via an earlier post, a result was the misalignment of the smaller ridge below.

How can I fix this?

Thank you in advance for your help

Tim

Garage-RV Floor Plan (2.2.16).plan

katalyst777,

Aaahh...my mistake.

It worked! 

Thank you

I tried that but it affected the pitch.  Leaving the pitch at 6:12 is the preference.

And...when I tried it, if I recall, it did not drop the bottom.

Am I just not doing it correctly?

• The open covered space is intended to be 13' -0"

Anyone inclined to help...

Somehow the right side of my gable roof raised by 12" above the opposite side?

Retracing my steps...the second floor originally projected from outside wall to outside wall.  In the 'RV Parking Area' I made the second story 'Open to Below' in order to get the clearance I needed in the space.  This is the only think I can think may have affected the raising of the outside of the gable wall...since the deleted floor was 12" and the gable raised by 12"...but it does not make since to me why this would cause the issue...nor did it help me trace fixing the issue.

Any ideas?

Any help is appreciated.

Thanks

Tim

Garage-RV Floor Plan (2.2.16).plan