Jeff_Rapp

Thanks for the reply. I thought that might be the case.

I have created a kicthen design including some custom cabinetry. Is there a way to export CAD type plans to allow a Joiner to estimate cost of construction? I am after high levels of component detail as the dimensions have to be very exact.

Arghhhhh! Brilliant!! Thank you very much.

Help. I have attached a plan which shows a roof in the lower left floating over nothing. It was a garage but I have deleted everything to do with that building but the roof refuses to leave. I've tried everything I can think of and look at with no luck. Can anyone help? Final.plan

I have added external soffits and one of them has decided to become transparent at both ends. No idea why. Tried recreating, copying others that display correctly, moved in out, up down. Just can't seem to make it display right. Plan attached. New Tumble.plan

Oops, sorry. basically a tunnel parallel to the slope with stairs inside.

I am trying to create a covered set of stairs on a slope. I have seen how to put stairs themselves into a slope and I have tried creating a 3 story room with open below but I can't get that tunnel effect. I am trying to do something like:

Attached is a picture showing a gap in a wall when I have rooms at half height on the wall. It's shown between the lower entrance floor and the floor of the room to the left. How do I fill the gap? I have used Deck as the floor type as I need post & beam floors. I have also attached the plan file. anne1.plan

The only way I can find to do a post and beam floor type (which is common in NZ) is using a deck floor. Worked but as the attached plan shows, the three floors are at different elevations and the walls in the passageway don't fill all the way down to the floor. I am probably missing something simple when using multi floor levels. You guys helped me big time when doing a similar thing but using slab floors. Using deck floors is stumping me. anne1.plan

How can I find out the actual dimensions of the objects in the library? I clearly have a mismatch between my plan dimensioning and the objects, i.e. the objects are too big. The attached plan shows a room that's 4x8 meters to which I've added a grouped living room from the bonus catalogue. One 2 seat sofa and table take up 4meters! Hav ei set the dimensioning wrong in the plan somewhere?

I get it. Thanks David.

Spectacular help, thanks so much. So I get the lesson right; because I modified/moved/played about with the rooms I ended up with inconsistent floor heights and that affected what happened when I added the garage? And the process re Terrain would be to create the house first (in total) and then add the Terrain so that it auto adjusts to the house?

I thought I had this licked in the last one where I had a building tumbling down a slope in 3 levels. I am trying to add a garage to the outside of this design where the slab floor is 1000mm lower than floor 1. Ceiling heights are the same. It just won't let me set that structure. And when I do get it to accept -1000 to Stem Wall Top even though the ceiling height is wrong the terrain around it stays too high. If I put a Terrain Elevation under the garage it drops floor 1 for some reason. Suggestions, please. High_Gable.plan

Thanks for the support. With the support here I have managed to resolve all the base issues. I now have a plan I call 'Tumble' which has a curved floor plan which 'tumbles' down the slope in three levels. Showed it to my wife last night and interested but not overly enthusiastic. Maybe I need to learn client management first!

I just realized I have given the mock up trying to work it out. Here is the actual tumble plan so that my comments make sense. Sorry about that. This is just the start of the plan to work the concepts. You can see I might have bitten off more than I can chew. The roofs gone strange and I can't work out how to fit it to the terrain but at least I've got it stepping down ok. Tumble.plan

That's looking like what we are trying to do. To answer Jo_Anns question, this is the same plot but the attached design didn't get the big tick from my wife. The new idea is living and master bed at the top then 'tumble' the rest of the living spaces down the hill with a passageway and glass wall following them down. Garden out the front of that through which you enter. Garage happens to be at the bottom as that is where the street is. And it's aligned that way because the view is at the top and the sun is 45 degrees to the north east. Thanks for all your help, I'll see what I can sort out. Middle_Deck.plan

I've turned off auto rebuild

I have a shallow slope and I want the floor plan to descend down it, i.e. I have 6 rooms in a line down the slope, each one at a lower level than the one above. I have been trying to use the walkout basement and other knowledgebase articles but haven't yet managed to make it happen. I've built a foundation, added step walls at the drop points and changed the floor heights to minus values but nothing gets lower than the reference floor hieght. Help. Down the slope.plan

I never knew that Solver. Thanks heaps.

Fantastic! Works. Now I get to grow back the hair I was pulling out. Thanks heaps.

How do you stack cabinets? Is that in 3d view putting wall cabinets on top of base cabinets? I've managed to make a single draw base cabinet, removed the countertop but can't seem to put anything on top.

Suite 2018. I am trying to put two appliances into a full height cabinet and it gives me the error, 'This cabinet already has a fixture or appliance inserted into it. Would you like to replace it?' I am trying to create a cabinet with an Oven, a microwave and a pot drawer. The tutorial on the site doesn't work for me.

Yes Jo_Ann, that is exactly what I'm trying to do. Did you use Suite to do it?

I am trying to do a single story roof line that has two Shed roofs at either end facing each other with a flat roof between. I have tried all the full gable end and high shed combinations, made sure ceiling heights are all the same, etc. Made sure the center section has a pitch of 0. Just can't work out how to get it done. Some tips please.

I am trying to do a single story roof line that has two Shed roofs at either end facing each other with a flat roof between. I have tried all the full gable end and high shed combinations, made sure ceiling heights are all the same, etc. Made sure the center section has a pitch of 0. Just can't work out how to get it done. Some tips please.