DapperDan Posted June 26, 2020 Share Posted June 26, 2020 Hi, Probably a dumb question... Is there a setting to toggle such that I can input the raised heel height in terms of top of top plate to the top of top chord, like in the attached image? Thanks! Link to comment Share on other sites More sharing options...
solver Posted June 26, 2020 Share Posted June 26, 2020 29 minutes ago, DapperDan said: Is there a setting to toggle such that I can input the raised heel height in terms of top of top plate to the top of top chord Not that I know of. Really simple to take a cross section, measure and adjust. 1 Link to comment Share on other sites More sharing options...
Rookie65 Posted June 26, 2020 Share Posted June 26, 2020 You could read up on "Energy Heel Trusses" in the reference manual and see if that works for what you wish to achieve? 1 Link to comment Share on other sites More sharing options...
DapperDan Posted June 27, 2020 Author Share Posted June 27, 2020 To create a truss that sits on the top plate with no raised heel, do I leave the default settings alone here? I ask because if I make them both zero the truss appears to be floating... Thanks! Link to comment Share on other sites More sharing options...
solver Posted June 27, 2020 Share Posted June 27, 2020 The program will most of the time do the correct thing on its own. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now