scott_v
-
Posts
43 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by scott_v
-
-
My cabinets labels are displaying dimensions rounded to the nearest inch. For example a wall cabinet that is 33.5" wide and 36" tall displays as "W3436". I need my cabinet labels to display fractions without having to manually override the label for each cabinet. How do I do this?
-
-
Yeah he was plenty condescending, it was a short phone call.
-
I want to add a basic concrete patio off of the rear of the house. I've searched the Knowledge Base and Search and see plenty of discussions on an enclosed, or screened, or covered patio...build a room and make the walls invisible. My patio has no walls, no cover, and is a basic 4" thick concrete pad sitting on the dirt. Tech support said I should NOT be using Build Slab, but offered no solution other than build a room, invisible walls, etc.
-
I'm not tracking with you. From what I can see the Wood Material is not a 3D object rather a finish that is applied to a 3D object. Are you suggesting that a wood material be applied to a 3D object such as a soffit or a shelf, grain oriented properly, and then somehow that object becomes the dresser top?
-
David, see attached test plan. Rotate Material worked on the end table but not on the dresser. The only difference that I can see is that the dresser top has a wood edgeband, perhaps preventing grain rotation.
-
-
-
Don't know what you did differently. I cannot get it to show except that portion that falls outside the wall's vertical side lines.
-
I should have mentioned that my "shelf" is a custom soffit (I couldn't find a shelf object). As I mentioned, the problem seems to be that it's a virtual half wall on the screen but behind the scenes it's really a full height interior wall.
-
In he pic you can see that a 6" wide x 1.5" thick shelf centered on the top of a 4.5" half wall is only displaying the 3/4" portion of the shelf that extends beyond the half wall. It appears a half wall is in reality a full wall that is only pretending to be a half wall. How do I fix it so my shelf fully displays?
-
Rebooting my Mac fixed the problem. Memory issue I guess.
-
-
-
Tech support figured it out: When initially setting up my exterior walls I defined both the exterior siding and interior drywall as Main Layers rather than Exterior Layer and Interior Layer, respectively. This prevented the wall from receiving the birdsmouth cuts. Pilot error.
-
I posted the plan. #1 should be observable in the 3D orthographic full overview.
-
Plan attached. 2 issues observable in 3D :
1. Rafters are missing birdsmouth and are sitting on top plate leaving a gap between gable end walls and rafters
2. The entire structure appears to be raised in the air above the foundation
Any ideas on how to fix these?
Thank you.
-
Lots of fireplaces and wood stoves in the library.
I just saw that....was looking under heating and just saw furnaces. For some reason they put fireplaces under architectural rather than heating....go figure. thx.
-
-
Thanks all for the solutions!
-
What specifically are you having an issue with?
Specifically, I'm having trouble figuring out how to build what is described in my first post. I'm trying to build a base cabinet that is shaped like a boomeran.......angled at the middle of the cabinet.
-
I want to build a free standing island breakfast bar that is angled ~45 degrees in the middle. Think of a boomerang shape. The base will be two 36" W x 24" D x 34" T cabinets, joined at a 45 degree angle. The raised counter will be 18" deep and ~42" off the floor. Pretty std stuff. Could anyone point me to a knowledge base or other discussion on how to build this in Pro?
Thank you.
- 1
-
I also don't see any Wall Corner cabinets in my cabinet menu. I believe I'm just looking at the basic library stuff.....are there other library download options that offer a wider selection of kitchen cabinets?
I'm looking at Home Designer Core Catalogs.
-
If you want a simple flat panel, use a partition from the cabinet menu.
You can create a fancier version using a cabinet.
I don't see "partion" in my cabinet menu.
Displaying cabinet dimensions in fractions of inches
in Q&A
Posted
I'm a custom cabinet maker and always spec custom cabinets to fit the need rather than follow the dictates of industry convention. My fillers are typically incorporated into a stile thus become one with the cabinet W dimension. My current project is designing a narrow u-shaped galley kitchen where small fractions become significant. I have the option to manually create labels and will do that.
I had to chuckle at the suggestion that one should purchase a $2,000 upgrade to solve a labeling issue.
Thank you for your replies.