mark2457

you da man!

no idea why it worked, but it did!

Thanks!

Hi Guys

Using HD Pro 2021

Managed to get new second floor added. One problem. My gable over front door won;t draw. I defined the long wall as Full Gable and the two short walls as hip walls. It should look like front.jpg, but with a 4/12 pitch

Anyone got any idea why?

Thanks

Mark

3rd_Floor_new.plan

3rd_Floor_new.plan

thanks. that did it. got a few other issues to resolve, but it's getting there

I had those options. I can live with a few inches of wall being added: the model is for visualization of remodel of 2nd floor (attic) (not for plans or materials)

I added some interior walls and they are a few inches high. Seems like I need Open above or something

First Floor No Stairs or Cabinets - Ext Steps and Basement - test floor 3.plan

Thanks for quick reply. I'm using auto roofs. Added a second floor with abs ceiling height same as floor. Seems to have added more brick for new joists, but it's got sistered joists

Hi All

Using HD Pro 2021

I finished basement and 1st floor, now I need to layout the interior of the attic. As you can see from attached the pix, it has knee walls and a vaulted ceiling with collar ties

The roof goes all the way down to the original hip walls (i.e. first floor ceiling). The current attic in HD has no ceiling or floor. When I add a half wall for one of the knee walls I get a message saying I probably want to add another floor, but not sure how, as the wall height at the exterior is actually 0"

How should I do this?

Thanks

Mark

Hi all

Using HD Pro 2021

My model is coming along well. Newest problem is that porch roof is too high (walls are too tall). The porch is 8" below main floor, so I set floor to -8"

The windows are 72" high and only 10' from the start of the (vaulted) ceiling. I've set the absolute ceiling height to 82, but regardless what value I set the roof never moves

Can anyone point me in the right direction?

Thanks

Mark

First Floor No Stairs or Cabinets - Ext Steps.plan

Hi All

Using HD Pro 2021

Managed to build most of the house I'm working on in HD Pro, but realized I did a several things incorrectly (ext wall makeup being one), so I decided to start over and set all the defaults first.

Drew the perimeter and want a simple gable roof. All walls are identical (except long sides are hip walls and short sides are full gable), so no idea why I'm missing the brick on the hip walls and why there is a gap at the bottom (see attached)

Anyone got any idea what I've done wrong?

Thanks

Mark

8115 Kostner 3.plan

Hi Guys

Using HD Pro 10

Having many issues with trusses.

I have my framing complete 

I can't add trusses without roof planes (asks me if I want to create general framing member)

Build roof planes:

Get this (roof planes hidden). I assume the walls have to be extended thru the gable at this point

Add first truss. All looks OK

Copy trusses

Seem to have truss and gable end wall

Seem to have birdsmouth cut on truss

Change end truss to dropped end. Lose overhang and it sinks into top plates

I figure I MUST be doing something wrong. Plan attached. Can anyone tell me where I'm gong wrong?

Thanks

Mark

01. Garage v3 (22x24f).plan

Hi David

 

It's a regular DXF file, but for some bizarre reason you can't upload dxf files to this forum, so I added the .txt extension so the forum software doesn't complain

Thanks

I bought Pro 10 a few years back for a big remodel. Can't justify the upgrade to latest version. Will try and find a dxf converter

Hi All

I built a truss roof with an 18" overhang. For some reason the overhangs isn't aligned with remainder of roof. Can anyone tell me why and how to fix?

screenshots and project attached (using HD Pro 10 BTW)

Garage Slab and Trusses - pitch 4-12.plan

Hi Guys

 

Anyone had any luck importing DXF files?

 

I want to purchase a site plan on line and import into HD Pro 10. But all I get is the database conversion dialog for hours (file attached, but with txt extension because I can't upload DXF)

 

Regards

 

mark

Hi David

It's a regular DXF file, but for some bizarre reason you can't upload dxf files to this forum, so I added the .txt extension so the forum software doesn't complain

Hi Guys

Anyone had any luck importing DXF files?

I want to purchase a site plan on line and import into HD Pro 10. But all I get is the database conversion dialog for hours (file attached, but with txt extension because I can't upload DXF)

Regards

mark

2000 Vista Rd v2004.dxf.txt

Hi Guys

I have a plat of survey that is 1":20' scale.

I need to produce a site plan and a version of the survey that has the location of my new detached garage.

Is there a way to place the existing survey as a background image and "trace' over it with cad tools?

If not what's the easiest way to recreate? I started by transferring coordinates point by point, but it's laborious process. i'm sure there's a better way

regards

mark

I don't still have any of my older versions installed to double check, but you should just be able to move the walls to resize the structure, and then rebuild the roof and framing.

it worked, but was a lot more work than I anticipated (and a lot of cleanup to do afterwards)

Hi Guys

Using HD10. I've designed a 24x24 detached garage on monlithic slab. Biggest city will let me do is 20x20, so need to resize. Can't figure out how to do it.

Can someone point me in right direction?

Thanks

Mark

Garage Slab and Trusses 20x20- pitch 4-12.plan

Hi All

Looking for a material like LP SmartSide

http://www.menards.c...t/p-2238339.htm

Anyone know if there's anything similar available?

Thanks

mark