solver

Was able to use the roof tools in Pro, but don't think Suite has this option.

What specifically are you having trouble with?

Posting your plan would make it easier for others to help.

"Open Below" is a room type set in the Room Specification dialog. It's below Office in the list. It is used for stairwells, and other 2 story spaces.

Check your Room Specifications > Structure, and make sure settings are the same in all rooms. Second floor make sure rooms are defined and not Open Below.

See the image. Room Divider (invisible wall) showing. How to make it invisible or not extend down?

You may copy your plan and then paste into a new plan created with a different template. You will loose some information, like room definitions. I have made the suggestion that it should be easy to apply a style to any plan changing the look of various things.

Right click on your soffit after you have applied your materials. You are saving the modified soffit to the library.

Once you apply your chosen material to a section of soffit, you may save that soffit to your Library (right click - add to Library). Then it is available to use as you would a normal soffit, only with your material already applied. Also, once a material is selected in the library browser, it is available to apply, so a click in the library browser, then a click on the surface to apply.

Image shows a door placed where it opens between 2 floors. I added the door and positioned it (control-drag) where I wanted it in a 3D view. Initial placement has to be on one floor or the other, but then you may move it wherever you like.

The answer is in your description. Different pitch for each side of the gable. Change the pitch in the wall specification dialog for the wall the roof plane is resting on to match your roof. I'd also call your vertex a ridge.

Feel free to post your revised plan. I'll be happy to take a look.

There is a "Follow Stairs" check box, but it seems to be grayed out by default which is why I missed it (image 1). Follow Stairs shows checked in the image, but only because I had already checked it. It would not be checked if starting from scratch. The "Specify Railing" check box is checked, but if you uncheck it, then check it, the entire "Build From" area, including the "Follow Stairs" check box becomes available (image 2). You can then check it, and the wall, or railing will follow the slope of the stairs. Notice in image 3, how the lower part of the wall follows up one way (after breaking the wall), and the upper part follows in the opposite direction. I created the center wall on the first floor, and the "Follow Stairs" option caused it to extend into the 2nd floor space. -- Eric

Both Mick and I show a second floor using your plan, so I don't believe it is a problem with walls. I'm a new user and don't have any ideas on how to get the floor back. -- Eric

Also, if you look close at the wall between the master bath and closet, you will see that it isn't straight. -- Eric

Click on the stairs and then on the Auto Stairwell Tool. The error message tells you what is needed. Go up one level and see there are railings that have been built (image 1). The railing needs to be manually connected to the left wall (image 2). I am guessing because the upper and lower walls are not aligned. Now you have completed the connection and made a room. Change type to Open Below. See image 3. Arn't stairs fun -- Eric

What specifically are you having trouble with?

Thanks Mick and David. 1/2 walls seem to be a shortcut to a solid railing, so no help there. Also tried dragging walls over these, and various other things. Was hoping I had missed 1 important check box somewhere. -- Eric

Short flight of stairs with short walls (solid railing) on either side. Program wants the tops at an angle to follow stairs -- I don't. Ideas? -- Eric

To make the end post show, I added a short invisible wall where the post is. This prevented the wall on the left from overlapping the end post. Where the stairs connect to the upper floor, I noticed multiple things a bit out of alignment and tried to correct them. Under Staircase Specifications > Style, I checked "Nosing at Top Landing" and "Riser Surface at Top Landing". On the wall below -- The one with the door to the under stair storage, I checked "Balloon Through Ceiling Above". Getting the connection between the stairs and upper floor correctly spaced was important. Too close or too far and surfaces did not render correctly. Also the stair width was critical, and still not right. Your plan with my changes is attached. -- Eric

For the ledge, you should be able to move the wall over in line with the one below. When you are on a floor above another, the edit tool bar has a tool for aligning a wall with the one directly below. When I did the steps using your plan, I did the lower flight, and it snapped to the left wall, then the upper flight, and it snapped to the right wall, then the landing, which filled the space. Adding the landing last seems to be the easiest way, at least for me. No breaking needed. -- Eric

Not correct, but better. Changed many small things. Will try to list in the AM. -- Eric

Should not need the break line to do this, but if it worked, then good. I added a wall in the basement on the open side of the stairs, but only after drawing them.

Zip up your plan file and upload it here so we may take a look.

What did it produce? Something similar to your picture above? You get the landing, but the upper flight is not connected? Have you tried creating the stairs, then using the landing tool to create the landing?