glasseuph

Members
  • Posts

    9
  • Joined

  • Last visited

Posts posted by glasseuph

  1. Sort of. I want the peak of the left gable to match that of the peak on the left gable. With the attachment you provided the peak of the left gable is "behind" the peak of the right.

     

    I think I might have solved this problem myself by creating an invisible wall lining up with front wall on the right side of the 2nd story.

     

    Still working through adding the remaining areas of the 2nd story it to see whether the gable holds in place like I want though.

  2. As solver suggested, I tried adding some of the 2nd story into the plan. However, I can't seem to get the left gable wall to stay in place when I change the front approximate 15x15 space from Attic type to Bedroom type, which is over the Master Bedroom space on the main level. 

     

    With the space set to Attic, the roof line is basically what I'm looking for, there is still a minor height issue I need to work out on the right side of the roof, but I don't think that is causing the main problem of the left wall turning from Gable to something else entirely. 

     

    The intent of the front area space on the 2nd story that is causing the problems is that it should basically look like a dormer coming out of the roof. However, the "dormer" in this case spans the entire width of the Master Bedroom area below it. So obviously it is not really a dormer in this case. I just can't think of a better way to describe what I'm trying to do.

     

    I believe if you open the plan and then change the front space from Attic to Bedroom you will quickly see the problems I'm running into.

     

    I tried changing the Roof Build setting to base the roof lines off the 1st floor only. However, then no mater what I do I can't get the "dormer" for the 2nd story front space to be generated.

     

    Thanks

    dream-house-man-dormer.plan

  3. David, thank you so much for the informative video. I think that will help to get me moving in the right direction again. I agree with you, that my attempts here are more to get my ideas across to someone who can ensure all general building practices have been met.

  4. I'm using HD Suite 2015, I thought I put that information in my signature. Is it not showing up correctly?

     

    I'm attaching my current plan file, which is very much a work in progress. Hopefully that will the following description will help indicate what I'm trying to achieve.

     

    The goal is make the west and east walls of the house have a gable roof structure. The problem I'm running into is that I want the start of the roof to be at the main front conner of the Master Bedroom (not including the bump out) an the end of the roof to be at the north (back) wall of the Kitchen space with the peak of the roof being some where over the Master Bath area.

     

    Eventually, after I get the original plan drawn, I want to make a 2nd story living area in the void space of the gable roof structure.

     

    Where I'm at now:

     

    In order or to make the roof line of the Living area line up with the roof area of the Kitchen, I raised the ceiling height of the Living area. In addition, I also raised the roof area of the front Porch some. With this approach, the problem areas I have is the east wall of the Kitchen, north of the Living area, does not seem to have the 18" overhang. In addition, the bump out in the Living area is causing overhang, filling, problems that are better seen than described.

     

    I have also attached a couple images to help show the current problem areas I'm having.

     

    Any help you can provide would be much appreciated. I'm fearing that some of the things I want to do might be limitations of the Suite and I'm going to need Pro in order to do it correctly. Hopefully that is not the case. 

     

    Thank you for all your help.

    dream-house-2.plan

    post-1405-0-86938900-1420132036_thumb.jpg

    post-1405-0-30676400-1420132051_thumb.jpg

  5. I'm trying to make the front porch line up with the 2nd story roof line. My initial thought on how to achieve this was to adjust the rough ceiling height of the porch to be offset by the distance between the 1st and 2nd floors. So with default rough ceiling height of a 9' ceiling, 109 1/8", I added the floor structure height of 12 5/8" and then set the rough ceiling height for the porch area to 121 3/4" (109 1/8 + 12 5/8). The result was the porch roof line was still too low.

     

    So by trial and error I came up with a rough ceiling height of 135" for the porch, which is what you can see in the porch joining 1.jpg attached image.

     

    At first this appeared correct to me, but after looking at the resulting image in porch joining 2.jpg, I realized there was an error in the ceiling "configuration" since there is that small "tray ceiling" effect at the front of the porch.

     

    Ideally, I would think the correct thing to do here would be to have the porch ceiling height the same as the 1st floor ceiling height. However, I'm not sure what the right approach to making the roof lines connect, align like what is shown in the 1st attached image. 

     

    Can someone please point me into the right approach for achieving the desired look I'm after?

     

    Do I need to perhaps create a "dead" room over the porch with walls that are short in height such that the resulting roof would then line up with the roof of the 2nd story? If so, any ideas on how what the mathematics behind determining the wall height of this new room would be?

     

    Thanks

    post-1405-0-10551200-1420052023_thumb.jpg

    post-1405-0-07967100-1420052031_thumb.jpg

  6. I'll give the soffit a try. Not the typical application I was expecting for one. But after reading through the reference manual some more, looks like this is a good use for one. Thanks

  7. I'm very new to HD. I tried searching the forum for something similar to what I'm trying to do but could not find an answer.

     

    What I'm trying to do is create an L shaped catwalk in the garage area. In the attached image, the catwalk needs to go along the back wall and along the wall that enters the house. The intent would be to have a single step from the catwalk up into the house as well.

     

    I'm assuming for the step, I can just use the stair tool and then edit the stair profile to remove the overhang of the treed and change the material to concrete.

     

    Thanks for you help.

    post-1405-0-63789800-1419982488_thumb.jpg